The creation's « Abandonner la création ? » no longer outlives it:
« Replacer le point », « Reprendre le tracé », « Créer » (« Utiliser
cette position » included) and « Annuler le tracé » clear a question
still open, which would otherwise reappear over the page. Locals
trimmed in the creation dialog and the tracing actions (5 max).
Tests added (no assertion removed): the two lapses (RED without the
fix, GREEN with it); a view chip and a tool ask during a tracing; the
mode flip keeps the dialog, its form and the ghost; a history jump out
of the editor waits for the creation's question; e2e: « Reprendre le
tracé » and « Revenir aux propriétés » under expectNoShift at 1 024,
1 180 and 1 280 px, the strip's last command inside it, axe on the
resumed state.
U2 Task 7 (A2, A4, A5, A7, A12, A15; R-3, R-4, R-12, R-13, R-14).
The work store's `creation` owns the new shape, its form, its view and
F: a click with the point tool, a closed tracing or a keyboard
« Ajouter … » opens « Nouveau point / zone / accès », a modal without
a history layer over the right column, mounted beside EditOnly so a
read-only flip keeps it (« Créer », « Replacer », « Reprendre » off).
A new zone or link is a creation from its first vertex. The ghost
takes the form's category colour; the point tool previews under a
mouse; the canvas carries data-creating (other markers dimmed,
unselectable). « Replacer le point » / « Reprendre le tracé » hide the
dialog and keep the form; the strip offers « Revenir aux propriétés »,
« Retirer le dernier sommet », « Abandonner ». « Créer »: one insert,
tool back to « Sélectionner », the new element selected, « Point
créé · Défaire », focus on its row. ✕, Échap, « Abandonner » and Back
always ask « Abandonner la création ? » (DiscardConfirm inside the
dialog; DrawingGuardDialog elsewhere); answerDrawing drops the
creation. Undo, its shortcuts and the line's « Défaire » are inactive
during a creation. missingFields replaces formProblem (MissingSummary
shared with the edit form); the C26 notice has no numbers.
CreationPanel, formProblem, withGeometry and the keys required.fields,
required.names and create_cancel are gone; GeometryGroup is imported
by RepairDialog only.
Removed or rewritten assertions:
- tab « holds a point at the frame centre »: « Centre x » = 50 ->
the ghost circle cx = 50; plus tool back to Sélectionner, « Point
créé », one undo step.
- tab « refuses a creation without laterality »: the general line
« Choisissez la catégorie et la latéralité » -> only « Choisissez
une latéralité. » and « À compléter : Latéralité. », focus on it.
- tab « applies the geometry group to a pending zone »: removed (A8,
no coordinate field) -> « places a triangle at the centre: the ghost
shows it, Créer inserts it »; vertex edits after Créer are the e2e
keyboard test.
- tab C26 « proposes C »: « x = 15, y = 15 » in the notice -> the R-4
text, the notice inside the dialog; cancel test « Centre x » = 0 ->
ghost cx = 0.
- tab « offers the correction when the core refuses a pending point »
(typed cx 98): removed, no typed coordinate is possible; the verdict
path stays covered by the C26 click tests and correctionFor units.
- tab H5 « a typed radius shows the core issue »: removed (A8); the
size refusal is the slider's (Task 4 tests).
- tab H6 « a second click moves the pending point »: -> « Replacer le
point », then the click moves the ghost, the form kept.
- tab H7 « Centre x/y » = 30/50 -> ghost cx/cy.
- tab tracing Enter: « x du sommet 3 » -> ghost points; « drops the
tracing on Escape » -> Escape asks first (board 32 row 3), Continuer
keeps, Abandonner drops; new « Annuler le tracé acts at once ».
- keep-alive « a pending creation is kept and focused » and « a
tracing … is kept and focused »: the tab now asks first (R-12) ->
« Continuer » keeps the tracing / the form, « Abandonner » goes.
- sections « its panel takes the focus » -> its dialog's
[data-creation-focus] takes it.
- no-loss « pending creation with its name » (hidden with the body) ->
the dialog stays across the crossing, read-only, Créer off (R-14).
- point-edit A5 « Rayon » = 7 / 9 -> ghost r = 7 / 9.
- e2e editor-annotations keyboard test « numeric position » (cx field
250) -> UX_TESTS Keyboard: zone added, vertex added and removed,
moved by the move mode, validated, saved. The « Fermer le tracé »
step runs under expectNoShift again (shortcut removed).
- e2e editor-geometry C26: the proposed x, y read from the notice
text -> from the overlay's correction circle; the R-4 text checked
in the dialog.
- e2e editor-deselect « Escape cancels the tracing only » -> Escape
asks, « Abandonner » cancels it, the selection kept.
- e2e editor-shell-crossing « keeps its tool and its pending
creation » (field hidden) -> the dialog stays read-only, Créer off,
then editable on widening.
U2 Task 6 fix round 1 (review minors 1 to 9).
- R-6: `Dialog` takes `veilCloses`; the annotation dialog passes false,
so its veil ignores clicks centred too. Other dialogs unchanged.
- Save merges each name on its own (an EN refreshed meanwhile survives
an FR-only edit); the merged annotation is typed per kind, no cast.
- Tests: the category change and the region row really run (a second
category and a region in the fixture); EN kept under an FR edit;
focus to the drawing when a filter hides the row; a centred veil
ignores a click; act() around the store write; ui.Dialog restores
innerHeight and visualViewport after each test.
- e2e: `pickAnnotation` no longer scrolls; `scrollToTop` is explicit
where a low row leaves the drawing out of view (editor-zones x3,
editor-geometry). editor-geometry runs the accepted repair from the
page's end, buttons pressed in place, scroll unchanged. The touch
and double-click tests wait on the clicks themselves; the stray
click on the veil can fail.
- CreationPanel's `required.fields` recorded as a shortcut for Task 7;
TODO lines updated. focusTarget comment wrapped.
U2 Task 6 (A1, A2, A3, A9, A10, R-3, R-5, R-6, R-14, R-16).
- Dialog: `anchor` places the panel at the column's left and width,
from its top, under a 22 % ink veil that ignores clicks; the visual
viewport below 320 px; centred without an anchor box.
- Navigation: `annotation` layer (LAYERS, EditorView, history entry,
leave guards, left-draft flag); Back closes, Forward reopens.
- AnnotationDialog: read body, « Modifier » form (CreationFields with
« Couleur », missingFields, R-3 messages), one `update` on the
current annotation by id, « Marquer comme relu », « Modifier la
forme », « Supprimer »; read-only flip keeps the draft.
- The column always shows the overview, selected row marked; Enter on
it, a second click or a double click, the strip's « Propriétés »
open the dialog. « Aller à » focuses the row (R-5).
- Read-only twin: strip and read-only dialog at 1 024 px and wider,
inline read body below. PropertiesPanel and AnnotationFields gone.
- Strip lead 256 px and a fixed status slot, so the commands fit at
1 024 px and a status change moves nothing.
- e2e: `aside-content` exemption removed; scroll-to-top workarounds
of editor-geometry, editor-zones and editor-journey removed.
Removed assertions mapped:
editor-annotations-tab.test.tsx:
- selectFromList waited for `annotation-properties` -> waits for the strip's « Propriétés » (selection without dialog, A1)
- refused place: issues block `annotation-geometry-issues` in the panel -> the strip notice alert (present, then gone)
- keyboard creation / C26 confirmation: `annotation-properties` after create -> strip « Propriétés » (new element selected)
- Désélectionner from the panel -> « Désélectionner » in the strip (all 7 tests); « panel closes » -> strip has no « Propriétés »
- undo after deselect (typed name) -> handle key series then deselect then undo
- commits a valid typed value once without blur (name field) -> a pending handle key series committed once by the strip deselect
- a refused typed value: the panel closes (two tests: strip deselect, tap deselect) -> removed: no field outside the dialog; the dialog's draft writes nothing before « Enregistrer » (new dialog tests)
- not offered while a replace tracing runs: panel's Désélectionner absent -> strip offers neither « Désélectionner » nor « Propriétés » during the tracing
- tap: isDeselected read `annotation-properties` -> strip « Propriétés » absent; link select -> strip title data-selection
- tap: undo after tap deselect (typed name) -> handle series; typed value committed on blur -> handle series committed on blur
- strip geometry issues: list read in the panel -> list read in the properties dialog's issues block
- a new commit replaces the message (typed name) -> « Marquer comme relu » in the dialog
editor-escape.test.tsx:
- `panel()` = `annotation-properties` -> the strip's « Propriétés » or the phone twin's inline read body
- Escape from a panel button (« Marquer comme relu ») -> from the selected row in the side column: focus on the row
- after A then B from the panel (via « Toutes les annotations ») -> select A, select B, Escape from a button of the side column: focus on B's row
- a text field (panel « Nom (FR) ») -> the overview « Filtrer par nom »
- redraw via the panel's « Remplacer par un polygone » -> the strip's command
- modal / delete dialog opened by the panel's « Supprimer » -> « Supprimer » of the properties dialog
- read-only width: hidden `annotation-properties` -> hidden strip « Propriétés » of the kept edit body
editor-history-buttons.test.tsx (typed text and the press, 8 tests): the annotation's committed « Nom (FR) » field of the panel -> the sheet's committed « Nom (FR) » on Général (same TextField commit-on-blur path; annotation fields are now a dialog draft)
editor-focus-request.test.tsx: « Aller à » focuses `data-properties-heading` inside `annotation-properties` -> focuses the annotation's row, marked aria-current, no dialog (R-5)
editor-sections.test.tsx: « Aller à » with nothing in progress focused the properties heading -> focuses the row (R-5); creation kept: no `annotation-properties` -> no strip « Propriétés »
editor-overview.test.tsx (edit and read-only): row opens `annotation-properties`, « Toutes les annotations » returns -> row selects, stays marked aria-current, no dialog; strip « Désélectionner » returns focus to the row; filter kept across select and « Désélectionner »
editor-citations-guards.test.tsx: LAYERS_TOP_DOWN gains 'annotation' at the bottom
editor-keep-alive.test.tsx: `annotation-properties` visible after the round trip -> the strip's « Propriétés » visible (selection kept)
editor-no-loss.test.tsx: ids `ro-annotation-name-fr` and `annotation-name-fr` (both panels' fields) -> the twin's inline read body (no ids), then the dialog edit form's `annotation-edit-fr`, kept through a flip to 800 px, no duplicate id; « Aller à » visible `annotation-properties` -> visible `annotation-read` (inline twin), none at 1 280
editor-point-edit.test.tsx / editor-zone-edit.test.tsx: `select()` waited for `annotation-properties` and returned it -> waits for the strip's « Propriétés » and returns the strip (its « Désélectionner » and « Remplacer par un polygone » moved there)
- move mode Escape: `annotation-properties` still there -> the strip's « Propriétés » back after the mode
- « Toutes les annotations » asks first during a started move -> Enter on the selected row asks first (no dialog), and the strip offers neither « Propriétés » nor « Désélectionner » during the mode
- Escape from the handle / slider: `annotation-properties` gone -> the strip's « Propriétés » gone
- I-3 touch tap: `annotation-properties` gone -> the strip's « Propriétés » gone
e2e (sandbox):
- support/layout.ts: `aside-content` exemption removed (ShiftExemption type, the loose compare); every `swaps`/`SWAPS` argument removed (editor-annotations, editor-zones, editor-geometry)
- support/editor.ts pickAnnotation: clicked « Toutes les annotations » first when the panel showed -> the overview is always shown: clicks the row, then scrolls back to the top (the page no longer shortens)
- editor-annotations: `annotation-properties` visible after a creation -> strip with « Propriétés »; review toggle and « Supprimer » of the panel -> the properties dialog's; a jitter click on the selected point now opens the dialog (A1), closed by Escape before the drag; handle names exact (the marked row shares the prefix); trace close moved out of expectNoShift (creation panel until Task 7, shortcut + TODO)
- editor-deselect: `annotation-properties` -> the strip with « Propriétés » or the twin's inline read body; Escape in a field: panel « Nom (FR) » -> overview filter; delete dialog from the panel -> from the properties dialog (Escape closes it, then the dialog); « a typed value is applied by the click that deselects » (name field, refused blank) -> a pending point-handle key series applied by the deselecting click and by « Désélectionner » (refused value: no field outside the dialog); « the selected one stays » -> a second click, double click and jitter open the dialog, Escape closes it, selection kept
- editor-geometry: `annotation-geometry-issues` in the panel -> read in the properties dialog, then the strip notice; after the refusal the error count unchanged; scroll-to-top workaround removed
- editor-zones: panel « Désélectionner » -> strip; scroll-to-top after pickAnnotation removed (helper does it)
- editor-structures: panel « Supprimer » -> properties dialog « Supprimer », confirmation over it
- editor-journey: `#annotation-name-fr` committed field + `#annotation-laterality` -> the dialog's edit form, one « Enregistrer »; scroll-to-top removed
- editor-shell / editor-shell-journeys: « Aller à » focus on `data-properties-heading` -> the annotation's row (aria-current), no dialog (R-5)
- editor-shell-layout: focus kind `annotation-properties` -> removed (the overview is the side)
Task 5 review fix round 1.
- I-1: Insert and Delete on a vertex commit pending arrow steps first,
then act on the stored polygon (read from the store, not the render).
- I-2: deselect commits a handle's pending series before the handle
unmounts (commitFocusedSeries, no reliance on blur at removal).
- I-3: a touch or pen tap absorbs the click the browser synthesises at
its place, once, within 400 ms and 8 px; mouse and later clicks pass.
Scroll anchoring is off while the editor shows: the deselect's panel
swap scrolled the drawing under the finger. editor-deselect step c is
back at the page's end, and asserts the drawing does not move.
- I-4, M-2: the double-click and undo tests press what is there now;
a hand-set stale chosen vertex removes nothing.
- I-5: editor-zones undos, the vertex choice and the refused-trace
clicks run under expectNoShift; new e2e for I-2.
- M-1: Delete on the last vertex and Enter on « − » keep the focus on a
vertex (the next one is chosen).
- M-4: the strip notice comment names R-18. M-5: the tracing carries a
`refused` flag; only a refused close titles « Fermeture refusée ».
- M-7: TODO lines (bubble size shortcut, scroll-padding-top, scroll
clamp at the page's end).
Rewritten assertions: zone-edit « − » double click and undo-then-« − »
pressed the detached bubble -> press the live bubble or the box at the
same place. editor-deselect step c: scroll-to-top removed, drawing y
asserted unchanged. editor-geometry: scroll-to-top kept with the clamp
named (reported, TODO). editor-zones and editor-journey: comment says
the scroll-to-top undoes Playwright's own auto-scroll.
U2 Task 5. A selected polygon gets its vertex, « + » and « − » handles
(R-9, hidden « + » under two hit radii, R-18 zoom hint in the strip),
the handle cap at 40 (R-7), vertex drag and keys, the move mode on the
zone or the chosen vertex, « Redessiner » as a redraw mode kept in step
with its tracing (R-12 guard, R-13 drop), close radius in CSS px
(R-11). The numeric group leaves the properties panel (D1).
Removed or rewritten assertions (numeric group -> replacement):
- tab « shows its exact stored numbers » (Centre x field) -> the overlay
selection circle's cx attribute, same exact value.
- tab « a numeric edit » x3 -> « an edit on the drawing »: Enter on the
handle without a step commits nothing, a step + Enter commits once;
a refused handle drag keeps the stored shape then a drag inside the
frame repairs it (issues gone); Escape drops a pending series.
- tab C26 « Centre x 15 » -> overlay cx 15.
- tab C32 unmeasured « Centre x as text » -> no handle, no field.
- tab « adds and removes a vertex as part of the whole group » -> « + »
then « − » on the drawing; « never offers to remove below three » ->
« − » aria-disabled at 3.
- tab H8 « refused Remplacer drops the tracing » -> keeps it open with
« Fermeture refusée » (board 33 A); « refused vertex add/remove stay
non appliqué » -> a refused vertex drag restores the shape exactly.
- tab Désélectionner and D6b (typed Centre x committed, refused, undone)
x6 and strip « a new commit replaces the message » -> the same with
the Nom (FR) field (a blank name is the refused value).
- focus-request « Centre x 20 » -> overlay cx 20.
- escape « strip commands keep their Escape » -> a redraw: Escape on the
strip or the box cancels it (R-12 row 4); kept for a new zone tracing.
- keep-alive « Remplacer tracing kept across Aller à » -> ended by a tab
when empty, asked once a vertex is placed (R-12).
- e2e annotations: numeric cx edit + undo/redo -> handle keys + undo/
redo; jitter/drag and Task 4 point reads -> overlay attributes (the
stored place during the mode -> overlay-old-place); keyboard-only cy
and vertex x typed -> handle and vertex keys.
- e2e deselect: Centre x typed/refused/committed -> Nom (FR).
- e2e geometry, shell-crossing: Centre x/cy reads -> overlay attributes.
- e2e journey: cx +3 and vertex x +4 typed -> 3 and 4 arrow steps + Enter;
a far typed value + revert -> a far handle drag refused.
- e2e equine latency: typed cx rounds -> handle arrow + Enter rounds.
- guardDrawing commits a keyboard or size series the focus still holds
(its blur) and ends only the mode: a pending series is never dropped.
- A started move ended by a selection change is said (R-13).
- handleSize: no module-level state; useHandleSizes reads the device
once per handle layer. The layer reads ResizeObserver contentRect.
- Dead kind check removed in SelectionPointCommands; long lines wrapped
(code, doc).
- e2e: the zoom check waits for the transform to change; the move-mode
arrow clicks are under expectNoShift.
- « Toutes les annotations » in the properties panel asks the drawing
guard before it drops a started move (R-12); tests also cover a tool
and « Ajouter un point ».
- A keyboard series back on its place, or a slider pinned at its stop,
commits nothing.
- Escape that deselects from the handle or the slider moves the focus to
the row (or the drawing) instead of losing it.
- A link circle keeps its handle, named « Accès {nom} », with no slider
and no move mode (no label for it in REVUE).
- The move-mode drop notice waits until the body is shown (R-14).
- No layout shift: the strip's lead has a fixed width, the commands and
the message pill get a new box per set or message.
- Doc: hit shapes use pointer-events auto; the fine « − » bubble is
board 05's size.
- Tests: R-14 flip, A5 through the Point tool click, the repair e2e
wrapped in expectNoShift.
HandleLayer: its own svg over the overlay, not aria-hidden; the selected
point (or link circle) gets a focusable « Point {nom} » handle whose hit
circle (data-handle) the press machine reads, sized in CSS px under zoom
(R-9, read once from any-pointer: coarse). The Task 2 stand-in (the
selected marker as its own handle) is removed.
Keys on the handle: arrows step 0.5 % of the frame (Shift x10) as a
stamped series, Enter or blur commit once, Escape drops it (R-11, R-13).
SizeSlider in the strip for a selected point and for the Point tool (A5):
the view's sizes as ticks, the core minimum as a red mark, snap 8 px,
arrows 1 %, Page Up/Down next size, one commit on release, Enter or blur;
a refusal restores the size and draws the refused place in red dashes.
« Déplacer le point » opens the move mode (board 06 B): drag anywhere or
four arrows move a preview only, clicks select nothing, « Valider la
position » commits once, « Annuler » and Escape restore; the focus comes
back to the button. Escape follows board 32 (escapeAction). The overlay
reads the preview from the work store and draws the old place in grey
dashes. Ctrl+Z now also works from a slider (not a text field).
Rewritten assertions:
- editor-annotations-tab « a finger drags the selected point »:
drag(marker('anno-a')) -> drag(pointHandle()), same expected geometry.
- editor-geometry.spec « a point inherited out of its frame is repaired
through the geometry group » (cx/cy typed 200) -> « ... repaired with
the move mode »: a partial move refused and restored (cx 110, issue
kept), then a move inside kept (issue gone, fewer errors).
Task 3 review, fix round 1.
- The gesture message closes for good on any document or history
change (store subscription): undo then redo no longer revives it.
- Hover and focus hold only the message they were taken on: after
« Défaire » the next message expires.
- An accepted drop clears the strip's refusal hint again.
- Controller ruling: the message has its own fixed row under the add
buttons, column width; a refused gesture's full text also shows in
the strip notice (red, aria-hidden copy of the row's alert).
- expectNoShift: native requestAnimationFrame kept before page.clock
(keepNativeFrames), every part box asserted non-null, message row
measured; the e2e checks the message is not truncated.
No assertion removed; the refused-drop unit test gains the strip copy.
U2 Task 3 (A6, A14, R-2). A fixed-height strip over the drawing and the
right column replaces the tool line, the sr-only selection tag of the
edit body and TracingBar: lead (name + status, type + detail), notice
(refusal, first geometry issue + n, unmeasured view with its link, no
category, no child view), commands (Fermer le trace, Retirer le dernier
sommet, Annuler le trace). A fixed-height line under the drawing holds
the add buttons and the gesture message: a kept drop says « Point
deplace » with « Defaire » (same store undo as the header), a refused
drop says « Deplacement refuse : ... » as a red alert. 6 s, held by
mouse hover and focus inside, closed by any commit, undo or redo.
trace_pop and Backspace remove the last vertex. The busy « Aller a »
target is the strip's tracing commands. scrollbar-gutter stable, scoped
to the editor. e2e helper expectNoShift (boxes, scroll height, gutter,
client width, layout-shift sum). DraftHeader untouched: no shift seen.
Rewritten assertions (old -> new):
- tab unit « Sélection : point » on annotation-selection-tag -> strip
detail « Point »
- tab unit tag sr-only, not live -> strip lead outside any live region
- tab unit « 1 sommet posé. » -> « 1 sommet posé » (board 04 wording)
- tab unit D6b tag present / « zone » -> strip detail « Point » /
« Zone · 3 sommets »
- keep-alive, sections, escape units: tracing-bar -> tracing-commands
- e2e selectionTag helper -> strip title with data-selection; the
twin's tag is twinSelectionTag (deselect 375 px describe)
- e2e deselect « tag position absolute » (edit) -> strip height 64 px,
drawing top unchanged; twin Escape test keeps tag 0, properties 0,
overview visible
- e2e deselect and journey tracing-bar / annotation-selection-tag ->
tracing-commands / selectionTag
- e2e historyButton scoped to history-buttons (the message's
« Défaire » has the same accessible name)
D4 identity check: the integrity spec reads each own sheet's name by its
captured id and archives it only when it is exactly the seeded name.
seedGrant checks the account id as a captured id, now shared from
records.ts.
Board 30: in a three-column card at 1280 px the two buttons wrapped by a
few pixels. The failure row narrows their padding only there; the wrap
stays as the fallback. The network e2e now checks both on one row.
- the three fixture statements pass every value through literal(); the
sheet, draft and actor ids are refused unless they have the uuid shape
- test.use({ timezoneId: 'UTC' }): a row still in Paris time proves the
page sets the zone itself, whatever the host's
- the home ordering loop first asserts one <time> per item
- ratifiedDate escapes the dictionary text (escaped, now exported by
support/admin.ts)
- the long-search check types the text again and presses Escape: field
empty and focused, count back (Chromium's native type=search included)
R-24: no assertion removed or rewritten. Added: 'one date per home item'
(toHaveLength) before the unchanged ordering loop; the Escape block after
the unchanged button block. ratifiedDate builds the same pattern for the
current dictionaries (no RegExp character in them).
Run: admin-sheets-list 4 passed (fr, en x desktop, 375).
admin-sheets-list.spec.ts (sandbox, fr and en, desktop and 375 px): three
draft sheets of this run, the oldest saved last; search, count line against
the list answer of the same load, order by last modification then by name,
the Paris date format, a search cut at 100 characters and its clearing, axe
and no sideways scroll on the searched list, the empty state and
/app/admin; the home's latest changes. Teardown soft-deletes only the ids
this run created (D7).
allSheetsLink (e2e/support/admin.ts): the sheets card link named
admin.home.all_sheets or admin.home.see_all with any number.
R-24, locators rewritten (assertions unchanged):
- admin.spec.ts A1: areaCard(...).getByRole('link', { name:
dict['admin.home.all_sheets'] }) -> allSheetsLink(areaCard(...), dict)
- admin.spec.ts access per right: sheets.getByRole('link', { name:
dict['admin.home.all_sheets'] }) -> allSheetsLink(sheets, dict)
- editor-journey.spec.ts createSheetFromAdmin: section locator
.getByRole('link', { name: dict['admin.home.all_sheets'] }) ->
allSheetsLink(section locator, dict)
Helpers citationsDialog, closeCitations by the dialog's ✕. Owner journey
with tap at 375, keyboard and axe; geometry checks now dialog in viewport
with focus inside; refused « Tout afficher » over a dirty form.
I1 scroll restored at once on a Back into layers; I2 Aller a opens the target dialog in one push; M1-M9, criteria 8 and 17 (left-draft notice), entry caps, no exhaustive-deps disables, locals within 5.
« Aller à » a finding shows its row and opens its dialog in view mode.
E2e helpers wait for the history to settle after a layer or section
pop; the layout walk waits out the write budget. Label rows for the
nine new keys.
« Tout afficher » clears the search and keeps the sort. A landing waits
for the dialogs a move closed and for their focus restore. Helpers and
shell specs move to the dialog and sheet flow; new finding dialog spec
(entries, guards, flip, gone rule, Back and Forward over the layers).
EditorView held by the navigation reducer (restore_view), a history
adapter hook mounted in EditorWorkspace (push, replace, back, mount
rule, ownership, write budget, scroll map, refused POP), a guard stack
by layer, an announcer queue joined after open dialogs.