U2 Task 5. A selected polygon gets its vertex, « + » and « − » handles
(R-9, hidden « + » under two hit radii, R-18 zoom hint in the strip),
the handle cap at 40 (R-7), vertex drag and keys, the move mode on the
zone or the chosen vertex, « Redessiner » as a redraw mode kept in step
with its tracing (R-12 guard, R-13 drop), close radius in CSS px
(R-11). The numeric group leaves the properties panel (D1).
Removed or rewritten assertions (numeric group -> replacement):
- tab « shows its exact stored numbers » (Centre x field) -> the overlay
selection circle's cx attribute, same exact value.
- tab « a numeric edit » x3 -> « an edit on the drawing »: Enter on the
handle without a step commits nothing, a step + Enter commits once;
a refused handle drag keeps the stored shape then a drag inside the
frame repairs it (issues gone); Escape drops a pending series.
- tab C26 « Centre x 15 » -> overlay cx 15.
- tab C32 unmeasured « Centre x as text » -> no handle, no field.
- tab « adds and removes a vertex as part of the whole group » -> « + »
then « − » on the drawing; « never offers to remove below three » ->
« − » aria-disabled at 3.
- tab H8 « refused Remplacer drops the tracing » -> keeps it open with
« Fermeture refusée » (board 33 A); « refused vertex add/remove stay
non appliqué » -> a refused vertex drag restores the shape exactly.
- tab Désélectionner and D6b (typed Centre x committed, refused, undone)
x6 and strip « a new commit replaces the message » -> the same with
the Nom (FR) field (a blank name is the refused value).
- focus-request « Centre x 20 » -> overlay cx 20.
- escape « strip commands keep their Escape » -> a redraw: Escape on the
strip or the box cancels it (R-12 row 4); kept for a new zone tracing.
- keep-alive « Remplacer tracing kept across Aller à » -> ended by a tab
when empty, asked once a vertex is placed (R-12).
- e2e annotations: numeric cx edit + undo/redo -> handle keys + undo/
redo; jitter/drag and Task 4 point reads -> overlay attributes (the
stored place during the mode -> overlay-old-place); keyboard-only cy
and vertex x typed -> handle and vertex keys.
- e2e deselect: Centre x typed/refused/committed -> Nom (FR).
- e2e geometry, shell-crossing: Centre x/cy reads -> overlay attributes.
- e2e journey: cx +3 and vertex x +4 typed -> 3 and 4 arrow steps + Enter;
a far typed value + revert -> a far handle drag refused.
- e2e equine latency: typed cx rounds -> handle arrow + Enter rounds.
- guardDrawing commits a keyboard or size series the focus still holds
(its blur) and ends only the mode: a pending series is never dropped.
- A started move ended by a selection change is said (R-13).
- handleSize: no module-level state; useHandleSizes reads the device
once per handle layer. The layer reads ResizeObserver contentRect.
- Dead kind check removed in SelectionPointCommands; long lines wrapped
(code, doc).
- e2e: the zoom check waits for the transform to change; the move-mode
arrow clicks are under expectNoShift.
HandleLayer: its own svg over the overlay, not aria-hidden; the selected
point (or link circle) gets a focusable « Point {nom} » handle whose hit
circle (data-handle) the press machine reads, sized in CSS px under zoom
(R-9, read once from any-pointer: coarse). The Task 2 stand-in (the
selected marker as its own handle) is removed.
Keys on the handle: arrows step 0.5 % of the frame (Shift x10) as a
stamped series, Enter or blur commit once, Escape drops it (R-11, R-13).
SizeSlider in the strip for a selected point and for the Point tool (A5):
the view's sizes as ticks, the core minimum as a red mark, snap 8 px,
arrows 1 %, Page Up/Down next size, one commit on release, Enter or blur;
a refusal restores the size and draws the refused place in red dashes.
« Déplacer le point » opens the move mode (board 06 B): drag anywhere or
four arrows move a preview only, clicks select nothing, « Valider la
position » commits once, « Annuler » and Escape restore; the focus comes
back to the button. Escape follows board 32 (escapeAction). The overlay
reads the preview from the work store and draws the old place in grey
dashes. Ctrl+Z now also works from a slider (not a text field).
Rewritten assertions:
- editor-annotations-tab « a finger drags the selected point »:
drag(marker('anno-a')) -> drag(pointHandle()), same expected geometry.
- editor-geometry.spec « a point inherited out of its frame is repaired
through the geometry group » (cx/cy typed 200) -> « ... repaired with
the move mode »: a partial move refused and restored (cx 110, issue
kept), then a move inside kept (issue gone, fewer errors).
Task 3 review, fix round 1.
- The gesture message closes for good on any document or history
change (store subscription): undo then redo no longer revives it.
- Hover and focus hold only the message they were taken on: after
« Défaire » the next message expires.
- An accepted drop clears the strip's refusal hint again.
- Controller ruling: the message has its own fixed row under the add
buttons, column width; a refused gesture's full text also shows in
the strip notice (red, aria-hidden copy of the row's alert).
- expectNoShift: native requestAnimationFrame kept before page.clock
(keepNativeFrames), every part box asserted non-null, message row
measured; the e2e checks the message is not truncated.
No assertion removed; the refused-drop unit test gains the strip copy.
U2 Task 3 (A6, A14, R-2). A fixed-height strip over the drawing and the
right column replaces the tool line, the sr-only selection tag of the
edit body and TracingBar: lead (name + status, type + detail), notice
(refusal, first geometry issue + n, unmeasured view with its link, no
category, no child view), commands (Fermer le trace, Retirer le dernier
sommet, Annuler le trace). A fixed-height line under the drawing holds
the add buttons and the gesture message: a kept drop says « Point
deplace » with « Defaire » (same store undo as the header), a refused
drop says « Deplacement refuse : ... » as a red alert. 6 s, held by
mouse hover and focus inside, closed by any commit, undo or redo.
trace_pop and Backspace remove the last vertex. The busy « Aller a »
target is the strip's tracing commands. scrollbar-gutter stable, scoped
to the editor. e2e helper expectNoShift (boxes, scroll height, gutter,
client width, layout-shift sum). DraftHeader untouched: no shift seen.
Rewritten assertions (old -> new):
- tab unit « Sélection : point » on annotation-selection-tag -> strip
detail « Point »
- tab unit tag sr-only, not live -> strip lead outside any live region
- tab unit « 1 sommet posé. » -> « 1 sommet posé » (board 04 wording)
- tab unit D6b tag present / « zone » -> strip detail « Point » /
« Zone · 3 sommets »
- keep-alive, sections, escape units: tracing-bar -> tracing-commands
- e2e selectionTag helper -> strip title with data-selection; the
twin's tag is twinSelectionTag (deselect 375 px describe)
- e2e deselect « tag position absolute » (edit) -> strip height 64 px,
drawing top unchanged; twin Escape test keeps tag 0, properties 0,
overview visible
- e2e deselect and journey tracing-bar / annotation-selection-tag ->
tracing-commands / selectionTag
- e2e historyButton scoped to history-buttons (the message's
« Défaire » has the same accessible name)
Header Annuler/Retablir on every tab (aria-disabled, commit on pointerdown,
refused blur commit skips the undo). Save line: unsaved count selector
(savedDistance), saveLineState forms, server save time via readSaveTime
(lastSave in the store, never the browser clock). Discard relabelled and
names the stored copy. Tool column pair removed, glyphs in EditorGlyph.
Rewritten or removed assertions (R-24):
- editor-route.test: Revision 3 / unsaved text / Annuler les modifications
-> save-line testid, Abandonner label, copy sentence in the dialog
- editor-route-conflict, editor-route-recovery: Revision n and copy_cap/
copy_quota text queries -> save-line testid
- editor-no-loss: discard button label
- editor-annotations-tab: tool column undo/redo test -> no pair left
(behaviour moved to editor-history-buttons.test)
- e2e journey/annotations/recovery/structures/support saveDraft/lan:
undo/redo and revision/unsaved text -> historyButton, saveLine helpers;
structures toHaveCount(0) on old text -> exact Revision n line
- editor-shell clickability: header Annuler/Retablir added
Annotations of the view move from under the drawing to the overview card
(grouped by category, name filter, all rows); side column from lg.
Properties panel gains « Toutes les annotations ».
E2E mapping (R-24): after a creation the card is hidden (the new annotation is
selected), so list(...).getByText(name) became selectionTag toContainText
(annotations, geometry, journey); row clicks go through pickAnnotation
(annotations, geometry, journey, structures); geometry's list count 0 while a
creation is pending became selectionTag count 0.