Opt-in with MEASURE_DRAG=1 MEASURE_BUILD=preview: the app built with
the shell config's sandbox environment into e2e/test-results, served
by vite preview on 127.0.0.1:5193 (--strictPort), the allowlist set
to that origin and the fake Supabase origin. Suites unchanged.
useFraming gains twoPointerPan (the editor's pinch also pans by the
midpoint and scales from the spread since the pinch began; the
catalogue passes nothing). A futile one-finger drag shows the R-1
hint unless two fingers already worked in this editor visit (work
store flag). A finger drag of a handle shows the loupe (technique A:
the drawing copied once, data-anno-id stripped, outline on top).
editor-touch.spec covers 1 024, 1 180 and 1 280 px with CDP touch.
measure-drag.ts is the hand-run smoothness measure (MEASURE_DRAG=1).
equineShape moved from editor-zones.spec to support/editor.ts, no
assertion changed.
Task 7 fix round 1 (review task-7-review.md).
- Important 1: « Taille » shows beside « Revenir aux propriétés » while
a point is replaced (still hidden under the modal dialog); it feeds
the hover preview and the re-placed point (R-10).
- Important 2: a creation whose view leaves the document is dropped
and said, « Création abandonnée : la fiche a changé. » (dropped:
'creation', read by useDroppedNotice).
- Minor 3: DrawingGuardDialog leaves a creation question to the
creation dialog only while that dialog is really on screen
(creationShown, set by the dialog).
- Minor 7: the dialog's long className strings split into constants.
- Minor 8: dead TOOL_OF removed; trace_start is a redraw's only.
Tests added (no assertion removed): slider while replacing (unit,
RED then GREEN; e2e under expectNoShift at three widths, last strip
command inside the strip); view removed during a creation (RED then
GREEN); question shown by the workspace when the dialog is not on
screen (RED then GREEN); « Abandonner » while read-only; R-13 with a
restored copy during a started move; leaving the route resets the
work (fails with the session reset removed). The unit Back test's
comment is corrected: it does pin the modal branch.
The creation's « Abandonner la création ? » no longer outlives it:
« Replacer le point », « Reprendre le tracé », « Créer » (« Utiliser
cette position » included) and « Annuler le tracé » clear a question
still open, which would otherwise reappear over the page. Locals
trimmed in the creation dialog and the tracing actions (5 max).
Tests added (no assertion removed): the two lapses (RED without the
fix, GREEN with it); a view chip and a tool ask during a tracing; the
mode flip keeps the dialog, its form and the ghost; a history jump out
of the editor waits for the creation's question; e2e: « Reprendre le
tracé » and « Revenir aux propriétés » under expectNoShift at 1 024,
1 180 and 1 280 px, the strip's last command inside it, axe on the
resumed state.
U2 Task 7 (A2, A4, A5, A7, A12, A15; R-3, R-4, R-12, R-13, R-14).
The work store's `creation` owns the new shape, its form, its view and
F: a click with the point tool, a closed tracing or a keyboard
« Ajouter … » opens « Nouveau point / zone / accès », a modal without
a history layer over the right column, mounted beside EditOnly so a
read-only flip keeps it (« Créer », « Replacer », « Reprendre » off).
A new zone or link is a creation from its first vertex. The ghost
takes the form's category colour; the point tool previews under a
mouse; the canvas carries data-creating (other markers dimmed,
unselectable). « Replacer le point » / « Reprendre le tracé » hide the
dialog and keep the form; the strip offers « Revenir aux propriétés »,
« Retirer le dernier sommet », « Abandonner ». « Créer »: one insert,
tool back to « Sélectionner », the new element selected, « Point
créé · Défaire », focus on its row. ✕, Échap, « Abandonner » and Back
always ask « Abandonner la création ? » (DiscardConfirm inside the
dialog; DrawingGuardDialog elsewhere); answerDrawing drops the
creation. Undo, its shortcuts and the line's « Défaire » are inactive
during a creation. missingFields replaces formProblem (MissingSummary
shared with the edit form); the C26 notice has no numbers.
CreationPanel, formProblem, withGeometry and the keys required.fields,
required.names and create_cancel are gone; GeometryGroup is imported
by RepairDialog only.
Removed or rewritten assertions:
- tab « holds a point at the frame centre »: « Centre x » = 50 ->
the ghost circle cx = 50; plus tool back to Sélectionner, « Point
créé », one undo step.
- tab « refuses a creation without laterality »: the general line
« Choisissez la catégorie et la latéralité » -> only « Choisissez
une latéralité. » and « À compléter : Latéralité. », focus on it.
- tab « applies the geometry group to a pending zone »: removed (A8,
no coordinate field) -> « places a triangle at the centre: the ghost
shows it, Créer inserts it »; vertex edits after Créer are the e2e
keyboard test.
- tab C26 « proposes C »: « x = 15, y = 15 » in the notice -> the R-4
text, the notice inside the dialog; cancel test « Centre x » = 0 ->
ghost cx = 0.
- tab « offers the correction when the core refuses a pending point »
(typed cx 98): removed, no typed coordinate is possible; the verdict
path stays covered by the C26 click tests and correctionFor units.
- tab H5 « a typed radius shows the core issue »: removed (A8); the
size refusal is the slider's (Task 4 tests).
- tab H6 « a second click moves the pending point »: -> « Replacer le
point », then the click moves the ghost, the form kept.
- tab H7 « Centre x/y » = 30/50 -> ghost cx/cy.
- tab tracing Enter: « x du sommet 3 » -> ghost points; « drops the
tracing on Escape » -> Escape asks first (board 32 row 3), Continuer
keeps, Abandonner drops; new « Annuler le tracé acts at once ».
- keep-alive « a pending creation is kept and focused » and « a
tracing … is kept and focused »: the tab now asks first (R-12) ->
« Continuer » keeps the tracing / the form, « Abandonner » goes.
- sections « its panel takes the focus » -> its dialog's
[data-creation-focus] takes it.
- no-loss « pending creation with its name » (hidden with the body) ->
the dialog stays across the crossing, read-only, Créer off (R-14).
- point-edit A5 « Rayon » = 7 / 9 -> ghost r = 7 / 9.
- e2e editor-annotations keyboard test « numeric position » (cx field
250) -> UX_TESTS Keyboard: zone added, vertex added and removed,
moved by the move mode, validated, saved. The « Fermer le tracé »
step runs under expectNoShift again (shortcut removed).
- e2e editor-geometry C26: the proposed x, y read from the notice
text -> from the overlay's correction circle; the R-4 text checked
in the dialog.
- e2e editor-deselect « Escape cancels the tracing only » -> Escape
asks, « Abandonner » cancels it, the selection kept.
- e2e editor-shell-crossing « keeps its tool and its pending
creation » (field hidden) -> the dialog stays read-only, Créer off,
then editable on widening.
U2 Task 6 fix round 1 (review minors 1 to 9).
- R-6: `Dialog` takes `veilCloses`; the annotation dialog passes false,
so its veil ignores clicks centred too. Other dialogs unchanged.
- Save merges each name on its own (an EN refreshed meanwhile survives
an FR-only edit); the merged annotation is typed per kind, no cast.
- Tests: the category change and the region row really run (a second
category and a region in the fixture); EN kept under an FR edit;
focus to the drawing when a filter hides the row; a centred veil
ignores a click; act() around the store write; ui.Dialog restores
innerHeight and visualViewport after each test.
- e2e: `pickAnnotation` no longer scrolls; `scrollToTop` is explicit
where a low row leaves the drawing out of view (editor-zones x3,
editor-geometry). editor-geometry runs the accepted repair from the
page's end, buttons pressed in place, scroll unchanged. The touch
and double-click tests wait on the clicks themselves; the stray
click on the veil can fail.
- CreationPanel's `required.fields` recorded as a shortcut for Task 7;
TODO lines updated. focusTarget comment wrapped.
U2 Task 6 (A1, A2, A3, A9, A10, R-3, R-5, R-6, R-14, R-16).
- Dialog: `anchor` places the panel at the column's left and width,
from its top, under a 22 % ink veil that ignores clicks; the visual
viewport below 320 px; centred without an anchor box.
- Navigation: `annotation` layer (LAYERS, EditorView, history entry,
leave guards, left-draft flag); Back closes, Forward reopens.
- AnnotationDialog: read body, « Modifier » form (CreationFields with
« Couleur », missingFields, R-3 messages), one `update` on the
current annotation by id, « Marquer comme relu », « Modifier la
forme », « Supprimer »; read-only flip keeps the draft.
- The column always shows the overview, selected row marked; Enter on
it, a second click or a double click, the strip's « Propriétés »
open the dialog. « Aller à » focuses the row (R-5).
- Read-only twin: strip and read-only dialog at 1 024 px and wider,
inline read body below. PropertiesPanel and AnnotationFields gone.
- Strip lead 256 px and a fixed status slot, so the commands fit at
1 024 px and a status change moves nothing.
- e2e: `aside-content` exemption removed; scroll-to-top workarounds
of editor-geometry, editor-zones and editor-journey removed.
Removed assertions mapped:
editor-annotations-tab.test.tsx:
- selectFromList waited for `annotation-properties` -> waits for the strip's « Propriétés » (selection without dialog, A1)
- refused place: issues block `annotation-geometry-issues` in the panel -> the strip notice alert (present, then gone)
- keyboard creation / C26 confirmation: `annotation-properties` after create -> strip « Propriétés » (new element selected)
- Désélectionner from the panel -> « Désélectionner » in the strip (all 7 tests); « panel closes » -> strip has no « Propriétés »
- undo after deselect (typed name) -> handle key series then deselect then undo
- commits a valid typed value once without blur (name field) -> a pending handle key series committed once by the strip deselect
- a refused typed value: the panel closes (two tests: strip deselect, tap deselect) -> removed: no field outside the dialog; the dialog's draft writes nothing before « Enregistrer » (new dialog tests)
- not offered while a replace tracing runs: panel's Désélectionner absent -> strip offers neither « Désélectionner » nor « Propriétés » during the tracing
- tap: isDeselected read `annotation-properties` -> strip « Propriétés » absent; link select -> strip title data-selection
- tap: undo after tap deselect (typed name) -> handle series; typed value committed on blur -> handle series committed on blur
- strip geometry issues: list read in the panel -> list read in the properties dialog's issues block
- a new commit replaces the message (typed name) -> « Marquer comme relu » in the dialog
editor-escape.test.tsx:
- `panel()` = `annotation-properties` -> the strip's « Propriétés » or the phone twin's inline read body
- Escape from a panel button (« Marquer comme relu ») -> from the selected row in the side column: focus on the row
- after A then B from the panel (via « Toutes les annotations ») -> select A, select B, Escape from a button of the side column: focus on B's row
- a text field (panel « Nom (FR) ») -> the overview « Filtrer par nom »
- redraw via the panel's « Remplacer par un polygone » -> the strip's command
- modal / delete dialog opened by the panel's « Supprimer » -> « Supprimer » of the properties dialog
- read-only width: hidden `annotation-properties` -> hidden strip « Propriétés » of the kept edit body
editor-history-buttons.test.tsx (typed text and the press, 8 tests): the annotation's committed « Nom (FR) » field of the panel -> the sheet's committed « Nom (FR) » on Général (same TextField commit-on-blur path; annotation fields are now a dialog draft)
editor-focus-request.test.tsx: « Aller à » focuses `data-properties-heading` inside `annotation-properties` -> focuses the annotation's row, marked aria-current, no dialog (R-5)
editor-sections.test.tsx: « Aller à » with nothing in progress focused the properties heading -> focuses the row (R-5); creation kept: no `annotation-properties` -> no strip « Propriétés »
editor-overview.test.tsx (edit and read-only): row opens `annotation-properties`, « Toutes les annotations » returns -> row selects, stays marked aria-current, no dialog; strip « Désélectionner » returns focus to the row; filter kept across select and « Désélectionner »
editor-citations-guards.test.tsx: LAYERS_TOP_DOWN gains 'annotation' at the bottom
editor-keep-alive.test.tsx: `annotation-properties` visible after the round trip -> the strip's « Propriétés » visible (selection kept)
editor-no-loss.test.tsx: ids `ro-annotation-name-fr` and `annotation-name-fr` (both panels' fields) -> the twin's inline read body (no ids), then the dialog edit form's `annotation-edit-fr`, kept through a flip to 800 px, no duplicate id; « Aller à » visible `annotation-properties` -> visible `annotation-read` (inline twin), none at 1 280
editor-point-edit.test.tsx / editor-zone-edit.test.tsx: `select()` waited for `annotation-properties` and returned it -> waits for the strip's « Propriétés » and returns the strip (its « Désélectionner » and « Remplacer par un polygone » moved there)
- move mode Escape: `annotation-properties` still there -> the strip's « Propriétés » back after the mode
- « Toutes les annotations » asks first during a started move -> Enter on the selected row asks first (no dialog), and the strip offers neither « Propriétés » nor « Désélectionner » during the mode
- Escape from the handle / slider: `annotation-properties` gone -> the strip's « Propriétés » gone
- I-3 touch tap: `annotation-properties` gone -> the strip's « Propriétés » gone
e2e (sandbox):
- support/layout.ts: `aside-content` exemption removed (ShiftExemption type, the loose compare); every `swaps`/`SWAPS` argument removed (editor-annotations, editor-zones, editor-geometry)
- support/editor.ts pickAnnotation: clicked « Toutes les annotations » first when the panel showed -> the overview is always shown: clicks the row, then scrolls back to the top (the page no longer shortens)
- editor-annotations: `annotation-properties` visible after a creation -> strip with « Propriétés »; review toggle and « Supprimer » of the panel -> the properties dialog's; a jitter click on the selected point now opens the dialog (A1), closed by Escape before the drag; handle names exact (the marked row shares the prefix); trace close moved out of expectNoShift (creation panel until Task 7, shortcut + TODO)
- editor-deselect: `annotation-properties` -> the strip with « Propriétés » or the twin's inline read body; Escape in a field: panel « Nom (FR) » -> overview filter; delete dialog from the panel -> from the properties dialog (Escape closes it, then the dialog); « a typed value is applied by the click that deselects » (name field, refused blank) -> a pending point-handle key series applied by the deselecting click and by « Désélectionner » (refused value: no field outside the dialog); « the selected one stays » -> a second click, double click and jitter open the dialog, Escape closes it, selection kept
- editor-geometry: `annotation-geometry-issues` in the panel -> read in the properties dialog, then the strip notice; after the refusal the error count unchanged; scroll-to-top workaround removed
- editor-zones: panel « Désélectionner » -> strip; scroll-to-top after pickAnnotation removed (helper does it)
- editor-structures: panel « Supprimer » -> properties dialog « Supprimer », confirmation over it
- editor-journey: `#annotation-name-fr` committed field + `#annotation-laterality` -> the dialog's edit form, one « Enregistrer »; scroll-to-top removed
- editor-shell / editor-shell-journeys: « Aller à » focus on `data-properties-heading` -> the annotation's row (aria-current), no dialog (R-5)
- editor-shell-layout: focus kind `annotation-properties` -> removed (the overview is the side)
Task 5 review fix round 1.
- I-1: Insert and Delete on a vertex commit pending arrow steps first,
then act on the stored polygon (read from the store, not the render).
- I-2: deselect commits a handle's pending series before the handle
unmounts (commitFocusedSeries, no reliance on blur at removal).
- I-3: a touch or pen tap absorbs the click the browser synthesises at
its place, once, within 400 ms and 8 px; mouse and later clicks pass.
Scroll anchoring is off while the editor shows: the deselect's panel
swap scrolled the drawing under the finger. editor-deselect step c is
back at the page's end, and asserts the drawing does not move.
- I-4, M-2: the double-click and undo tests press what is there now;
a hand-set stale chosen vertex removes nothing.
- I-5: editor-zones undos, the vertex choice and the refused-trace
clicks run under expectNoShift; new e2e for I-2.
- M-1: Delete on the last vertex and Enter on « − » keep the focus on a
vertex (the next one is chosen).
- M-4: the strip notice comment names R-18. M-5: the tracing carries a
`refused` flag; only a refused close titles « Fermeture refusée ».
- M-7: TODO lines (bubble size shortcut, scroll-padding-top, scroll
clamp at the page's end).
Rewritten assertions: zone-edit « − » double click and undo-then-« − »
pressed the detached bubble -> press the live bubble or the box at the
same place. editor-deselect step c: scroll-to-top removed, drawing y
asserted unchanged. editor-geometry: scroll-to-top kept with the clamp
named (reported, TODO). editor-zones and editor-journey: comment says
the scroll-to-top undoes Playwright's own auto-scroll.
U2 Task 5. A selected polygon gets its vertex, « + » and « − » handles
(R-9, hidden « + » under two hit radii, R-18 zoom hint in the strip),
the handle cap at 40 (R-7), vertex drag and keys, the move mode on the
zone or the chosen vertex, « Redessiner » as a redraw mode kept in step
with its tracing (R-12 guard, R-13 drop), close radius in CSS px
(R-11). The numeric group leaves the properties panel (D1).
Removed or rewritten assertions (numeric group -> replacement):
- tab « shows its exact stored numbers » (Centre x field) -> the overlay
selection circle's cx attribute, same exact value.
- tab « a numeric edit » x3 -> « an edit on the drawing »: Enter on the
handle without a step commits nothing, a step + Enter commits once;
a refused handle drag keeps the stored shape then a drag inside the
frame repairs it (issues gone); Escape drops a pending series.
- tab C26 « Centre x 15 » -> overlay cx 15.
- tab C32 unmeasured « Centre x as text » -> no handle, no field.
- tab « adds and removes a vertex as part of the whole group » -> « + »
then « − » on the drawing; « never offers to remove below three » ->
« − » aria-disabled at 3.
- tab H8 « refused Remplacer drops the tracing » -> keeps it open with
« Fermeture refusée » (board 33 A); « refused vertex add/remove stay
non appliqué » -> a refused vertex drag restores the shape exactly.
- tab Désélectionner and D6b (typed Centre x committed, refused, undone)
x6 and strip « a new commit replaces the message » -> the same with
the Nom (FR) field (a blank name is the refused value).
- focus-request « Centre x 20 » -> overlay cx 20.
- escape « strip commands keep their Escape » -> a redraw: Escape on the
strip or the box cancels it (R-12 row 4); kept for a new zone tracing.
- keep-alive « Remplacer tracing kept across Aller à » -> ended by a tab
when empty, asked once a vertex is placed (R-12).
- e2e annotations: numeric cx edit + undo/redo -> handle keys + undo/
redo; jitter/drag and Task 4 point reads -> overlay attributes (the
stored place during the mode -> overlay-old-place); keyboard-only cy
and vertex x typed -> handle and vertex keys.
- e2e deselect: Centre x typed/refused/committed -> Nom (FR).
- e2e geometry, shell-crossing: Centre x/cy reads -> overlay attributes.
- e2e journey: cx +3 and vertex x +4 typed -> 3 and 4 arrow steps + Enter;
a far typed value + revert -> a far handle drag refused.
- e2e equine latency: typed cx rounds -> handle arrow + Enter rounds.
- guardDrawing commits a keyboard or size series the focus still holds
(its blur) and ends only the mode: a pending series is never dropped.
- A started move ended by a selection change is said (R-13).
- handleSize: no module-level state; useHandleSizes reads the device
once per handle layer. The layer reads ResizeObserver contentRect.
- Dead kind check removed in SelectionPointCommands; long lines wrapped
(code, doc).
- e2e: the zoom check waits for the transform to change; the move-mode
arrow clicks are under expectNoShift.
- « Toutes les annotations » in the properties panel asks the drawing
guard before it drops a started move (R-12); tests also cover a tool
and « Ajouter un point ».
- A keyboard series back on its place, or a slider pinned at its stop,
commits nothing.
- Escape that deselects from the handle or the slider moves the focus to
the row (or the drawing) instead of losing it.
- A link circle keeps its handle, named « Accès {nom} », with no slider
and no move mode (no label for it in REVUE).
- The move-mode drop notice waits until the body is shown (R-14).
- No layout shift: the strip's lead has a fixed width, the commands and
the message pill get a new box per set or message.
- Doc: hit shapes use pointer-events auto; the fine « − » bubble is
board 05's size.
- Tests: R-14 flip, A5 through the Point tool click, the repair e2e
wrapped in expectNoShift.
HandleLayer: its own svg over the overlay, not aria-hidden; the selected
point (or link circle) gets a focusable « Point {nom} » handle whose hit
circle (data-handle) the press machine reads, sized in CSS px under zoom
(R-9, read once from any-pointer: coarse). The Task 2 stand-in (the
selected marker as its own handle) is removed.
Keys on the handle: arrows step 0.5 % of the frame (Shift x10) as a
stamped series, Enter or blur commit once, Escape drops it (R-11, R-13).
SizeSlider in the strip for a selected point and for the Point tool (A5):
the view's sizes as ticks, the core minimum as a red mark, snap 8 px,
arrows 1 %, Page Up/Down next size, one commit on release, Enter or blur;
a refusal restores the size and draws the refused place in red dashes.
« Déplacer le point » opens the move mode (board 06 B): drag anywhere or
four arrows move a preview only, clicks select nothing, « Valider la
position » commits once, « Annuler » and Escape restore; the focus comes
back to the button. Escape follows board 32 (escapeAction). The overlay
reads the preview from the work store and draws the old place in grey
dashes. Ctrl+Z now also works from a slider (not a text field).
Rewritten assertions:
- editor-annotations-tab « a finger drags the selected point »:
drag(marker('anno-a')) -> drag(pointHandle()), same expected geometry.
- editor-geometry.spec « a point inherited out of its frame is repaired
through the geometry group » (cx/cy typed 200) -> « ... repaired with
the move mode »: a partial move refused and restored (cx 110, issue
kept), then a move inside kept (issue gone, fewer errors).
Task 3 review, fix round 1.
- The gesture message closes for good on any document or history
change (store subscription): undo then redo no longer revives it.
- Hover and focus hold only the message they were taken on: after
« Défaire » the next message expires.
- An accepted drop clears the strip's refusal hint again.
- Controller ruling: the message has its own fixed row under the add
buttons, column width; a refused gesture's full text also shows in
the strip notice (red, aria-hidden copy of the row's alert).
- expectNoShift: native requestAnimationFrame kept before page.clock
(keepNativeFrames), every part box asserted non-null, message row
measured; the e2e checks the message is not truncated.
No assertion removed; the refused-drop unit test gains the strip copy.
U2 Task 3 (A6, A14, R-2). A fixed-height strip over the drawing and the
right column replaces the tool line, the sr-only selection tag of the
edit body and TracingBar: lead (name + status, type + detail), notice
(refusal, first geometry issue + n, unmeasured view with its link, no
category, no child view), commands (Fermer le trace, Retirer le dernier
sommet, Annuler le trace). A fixed-height line under the drawing holds
the add buttons and the gesture message: a kept drop says « Point
deplace » with « Defaire » (same store undo as the header), a refused
drop says « Deplacement refuse : ... » as a red alert. 6 s, held by
mouse hover and focus inside, closed by any commit, undo or redo.
trace_pop and Backspace remove the last vertex. The busy « Aller a »
target is the strip's tracing commands. scrollbar-gutter stable, scoped
to the editor. e2e helper expectNoShift (boxes, scroll height, gutter,
client width, layout-shift sum). DraftHeader untouched: no shift seen.
Rewritten assertions (old -> new):
- tab unit « Sélection : point » on annotation-selection-tag -> strip
detail « Point »
- tab unit tag sr-only, not live -> strip lead outside any live region
- tab unit « 1 sommet posé. » -> « 1 sommet posé » (board 04 wording)
- tab unit D6b tag present / « zone » -> strip detail « Point » /
« Zone · 3 sommets »
- keep-alive, sections, escape units: tracing-bar -> tracing-commands
- e2e selectionTag helper -> strip title with data-selection; the
twin's tag is twinSelectionTag (deselect 375 px describe)
- e2e deselect « tag position absolute » (edit) -> strip height 64 px,
drawing top unchanged; twin Escape test keeps tag 0, properties 0,
overview visible
- e2e deselect and journey tracing-bar / annotation-selection-tag ->
tracing-commands / selectionTag
- e2e historyButton scoped to history-buttons (the message's
« Défaire » has the same accessible name)
D4 identity check: the integrity spec reads each own sheet's name by its
captured id and archives it only when it is exactly the seeded name.
seedGrant checks the account id as a captured id, now shared from
records.ts.
Board 30: in a three-column card at 1280 px the two buttons wrapped by a
few pixels. The failure row narrows their padding only there; the wrap
stays as the fallback. The network e2e now checks both on one row.
- the three fixture statements pass every value through literal(); the
sheet, draft and actor ids are refused unless they have the uuid shape
- test.use({ timezoneId: 'UTC' }): a row still in Paris time proves the
page sets the zone itself, whatever the host's
- the home ordering loop first asserts one <time> per item
- ratifiedDate escapes the dictionary text (escaped, now exported by
support/admin.ts)
- the long-search check types the text again and presses Escape: field
empty and focused, count back (Chromium's native type=search included)
R-24: no assertion removed or rewritten. Added: 'one date per home item'
(toHaveLength) before the unchanged ordering loop; the Escape block after
the unchanged button block. ratifiedDate builds the same pattern for the
current dictionaries (no RegExp character in them).
Run: admin-sheets-list 4 passed (fr, en x desktop, 375).
admin-sheets-list.spec.ts (sandbox, fr and en, desktop and 375 px): three
draft sheets of this run, the oldest saved last; search, count line against
the list answer of the same load, order by last modification then by name,
the Paris date format, a search cut at 100 characters and its clearing, axe
and no sideways scroll on the searched list, the empty state and
/app/admin; the home's latest changes. Teardown soft-deletes only the ids
this run created (D7).
allSheetsLink (e2e/support/admin.ts): the sheets card link named
admin.home.all_sheets or admin.home.see_all with any number.
R-24, locators rewritten (assertions unchanged):
- admin.spec.ts A1: areaCard(...).getByRole('link', { name:
dict['admin.home.all_sheets'] }) -> allSheetsLink(areaCard(...), dict)
- admin.spec.ts access per right: sheets.getByRole('link', { name:
dict['admin.home.all_sheets'] }) -> allSheetsLink(sheets, dict)
- editor-journey.spec.ts createSheetFromAdmin: section locator
.getByRole('link', { name: dict['admin.home.all_sheets'] }) ->
allSheetsLink(section locator, dict)
Helpers citationsDialog, closeCitations by the dialog's ✕. Owner journey
with tap at 375, keyboard and axe; geometry checks now dialog in viewport
with focus inside; refused « Tout afficher » over a dirty form.
I1 scroll restored at once on a Back into layers; I2 Aller a opens the target dialog in one push; M1-M9, criteria 8 and 17 (left-draft notice), entry caps, no exhaustive-deps disables, locals within 5.
« Aller à » a finding shows its row and opens its dialog in view mode.
E2e helpers wait for the history to settle after a layer or section
pop; the layout walk waits out the write budget. Label rows for the
nine new keys.
« Tout afficher » clears the search and keeps the sort. A landing waits
for the dialogs a move closed and for their focus restore. Helpers and
shell specs move to the dialog and sheet flow; new finding dialog spec
(entries, guards, flip, gone rule, Back and Forward over the layers).