U2 Task 7 (A2, A4, A5, A7, A12, A15; R-3, R-4, R-12, R-13, R-14).
The work store's `creation` owns the new shape, its form, its view and
F: a click with the point tool, a closed tracing or a keyboard
« Ajouter … » opens « Nouveau point / zone / accès », a modal without
a history layer over the right column, mounted beside EditOnly so a
read-only flip keeps it (« Créer », « Replacer », « Reprendre » off).
A new zone or link is a creation from its first vertex. The ghost
takes the form's category colour; the point tool previews under a
mouse; the canvas carries data-creating (other markers dimmed,
unselectable). « Replacer le point » / « Reprendre le tracé » hide the
dialog and keep the form; the strip offers « Revenir aux propriétés »,
« Retirer le dernier sommet », « Abandonner ». « Créer »: one insert,
tool back to « Sélectionner », the new element selected, « Point
créé · Défaire », focus on its row. ✕, Échap, « Abandonner » and Back
always ask « Abandonner la création ? » (DiscardConfirm inside the
dialog; DrawingGuardDialog elsewhere); answerDrawing drops the
creation. Undo, its shortcuts and the line's « Défaire » are inactive
during a creation. missingFields replaces formProblem (MissingSummary
shared with the edit form); the C26 notice has no numbers.
CreationPanel, formProblem, withGeometry and the keys required.fields,
required.names and create_cancel are gone; GeometryGroup is imported
by RepairDialog only.
Removed or rewritten assertions:
- tab « holds a point at the frame centre »: « Centre x » = 50 ->
the ghost circle cx = 50; plus tool back to Sélectionner, « Point
créé », one undo step.
- tab « refuses a creation without laterality »: the general line
« Choisissez la catégorie et la latéralité » -> only « Choisissez
une latéralité. » and « À compléter : Latéralité. », focus on it.
- tab « applies the geometry group to a pending zone »: removed (A8,
no coordinate field) -> « places a triangle at the centre: the ghost
shows it, Créer inserts it »; vertex edits after Créer are the e2e
keyboard test.
- tab C26 « proposes C »: « x = 15, y = 15 » in the notice -> the R-4
text, the notice inside the dialog; cancel test « Centre x » = 0 ->
ghost cx = 0.
- tab « offers the correction when the core refuses a pending point »
(typed cx 98): removed, no typed coordinate is possible; the verdict
path stays covered by the C26 click tests and correctionFor units.
- tab H5 « a typed radius shows the core issue »: removed (A8); the
size refusal is the slider's (Task 4 tests).
- tab H6 « a second click moves the pending point »: -> « Replacer le
point », then the click moves the ghost, the form kept.
- tab H7 « Centre x/y » = 30/50 -> ghost cx/cy.
- tab tracing Enter: « x du sommet 3 » -> ghost points; « drops the
tracing on Escape » -> Escape asks first (board 32 row 3), Continuer
keeps, Abandonner drops; new « Annuler le tracé acts at once ».
- keep-alive « a pending creation is kept and focused » and « a
tracing … is kept and focused »: the tab now asks first (R-12) ->
« Continuer » keeps the tracing / the form, « Abandonner » goes.
- sections « its panel takes the focus » -> its dialog's
[data-creation-focus] takes it.
- no-loss « pending creation with its name » (hidden with the body) ->
the dialog stays across the crossing, read-only, Créer off (R-14).
- point-edit A5 « Rayon » = 7 / 9 -> ghost r = 7 / 9.
- e2e editor-annotations keyboard test « numeric position » (cx field
250) -> UX_TESTS Keyboard: zone added, vertex added and removed,
moved by the move mode, validated, saved. The « Fermer le tracé »
step runs under expectNoShift again (shortcut removed).
- e2e editor-geometry C26: the proposed x, y read from the notice
text -> from the overlay's correction circle; the R-4 text checked
in the dialog.
- e2e editor-deselect « Escape cancels the tracing only » -> Escape
asks, « Abandonner » cancels it, the selection kept.
- e2e editor-shell-crossing « keeps its tool and its pending
creation » (field hidden) -> the dialog stays read-only, Créer off,
then editable on widening.
The draft route registers an at-stake predicate with its question;
AppLayout intercepts and replays a link through navigate(to) only when
it holds (or when unsaved changes arm the leave guard), so a Link keeps
its own replace and state. A download anchor is never taken.
Tests: the unstarted-move test no longer expects the mode ended by the
shell (the link is not intercepted; leaving the editor resets the work);
new: a Link's state reaches the page, a download link is not prevented.
U2 Task 5. A selected polygon gets its vertex, « + » and « − » handles
(R-9, hidden « + » under two hit radii, R-18 zoom hint in the strip),
the handle cap at 40 (R-7), vertex drag and keys, the move mode on the
zone or the chosen vertex, « Redessiner » as a redraw mode kept in step
with its tracing (R-12 guard, R-13 drop), close radius in CSS px
(R-11). The numeric group leaves the properties panel (D1).
Removed or rewritten assertions (numeric group -> replacement):
- tab « shows its exact stored numbers » (Centre x field) -> the overlay
selection circle's cx attribute, same exact value.
- tab « a numeric edit » x3 -> « an edit on the drawing »: Enter on the
handle without a step commits nothing, a step + Enter commits once;
a refused handle drag keeps the stored shape then a drag inside the
frame repairs it (issues gone); Escape drops a pending series.
- tab C26 « Centre x 15 » -> overlay cx 15.
- tab C32 unmeasured « Centre x as text » -> no handle, no field.
- tab « adds and removes a vertex as part of the whole group » -> « + »
then « − » on the drawing; « never offers to remove below three » ->
« − » aria-disabled at 3.
- tab H8 « refused Remplacer drops the tracing » -> keeps it open with
« Fermeture refusée » (board 33 A); « refused vertex add/remove stay
non appliqué » -> a refused vertex drag restores the shape exactly.
- tab Désélectionner and D6b (typed Centre x committed, refused, undone)
x6 and strip « a new commit replaces the message » -> the same with
the Nom (FR) field (a blank name is the refused value).
- focus-request « Centre x 20 » -> overlay cx 20.
- escape « strip commands keep their Escape » -> a redraw: Escape on the
strip or the box cancels it (R-12 row 4); kept for a new zone tracing.
- keep-alive « Remplacer tracing kept across Aller à » -> ended by a tab
when empty, asked once a vertex is placed (R-12).
- e2e annotations: numeric cx edit + undo/redo -> handle keys + undo/
redo; jitter/drag and Task 4 point reads -> overlay attributes (the
stored place during the mode -> overlay-old-place); keyboard-only cy
and vertex x typed -> handle and vertex keys.
- e2e deselect: Centre x typed/refused/committed -> Nom (FR).
- e2e geometry, shell-crossing: Centre x/cy reads -> overlay attributes.
- e2e journey: cx +3 and vertex x +4 typed -> 3 and 4 arrow steps + Enter;
a far typed value + revert -> a far handle drag refused.
- e2e equine latency: typed cx rounds -> handle arrow + Enter rounds.
With a started move, sign-out and an in-app link now ask « Abandonner
le déplacement ? » (R-12) through the page's own question, registered by
the draft route in leaveGuardStore (`ask`; the shell imports no editor
module). The generic leave and sign-out dialogs cover only sheet-level
unsaved work; with both pending the drawing asks first, then the sheet
question, as useLeaveConfirm orders them. A move with nothing started
arms nothing (it ends); a started one still guards a reload.
Tests: sign-out and link with a started move (alone and with sheet
changes), the history jump with only a move and after dirty layers, a
section entry and « Tout afficher ».
Measure kept as a canvas-width annotation, no console.log; positive
two-frame wait replaces the fixed sleep; 64rem listener asserted
absent in the editor; drawer default read from DEFAULT_SHELL; long
test lines wrapped.
AC9: on the draft editor path AppLayout uses the xl class set (sidebar
from 1 280 px, menu button and brand below); other pages keep lg.
AppLayout split: Sidebar and TopBar in ShellChrome.tsx. MobileDrawer
takes closesFrom ('64rem' | '80rem') and also closes at setup when
its query already matches.
Rewritten assertions (R-24):
- shell.AppLayout "opens the mobile drawer" and shell.navigation
"carries the same entries into the mobile drawer": stub a narrow
matchMedia, the drawer now closes at setup at the happy-dom width.
New: unit tests (class sets, 64rem/80rem close, setup close, leave
guard on a drawer link) and editor-shell.spec F journeys (sidebar at
1024/1180/1279/1280, one-tap menu, drawer open at 1180, guard).
packages/supabase assets module: closed AssetFailure kinds, begin / quarantine
upload (upsert off) / confirm / remove, own-row state read with an explicit
column list, download under the SELECT policy. App: client transport (magic
byte sniff, never SVG, createImageBitmap, canvas 1024 px, JPEG 0.9, 5 MiB
cap), AvatarSection (preview, save, 1 s polling up to 30 s, rejection and
failure messages per closed code, removal with confirmation, in-flight row
resumed at mount), auth store blob URL revoked on change and sign-out,
AvatarCircle in UserBadge and the top bar link to Mon compte (D3), FR/EN
strings, fake client extended, 27 new tests (app 300).